04111-40510-71 Engine Overhaul Gasket Kit Toyota Forklift

Overview

The 04111-40510-71 GASKET KIT, ENGINE O/H is a Toyota engine overhaul gasket kit supplied for a wide range of Toyota counterbalance forklifts. Assembled specifically for a complete engine rebuild, the kit brings together the gaskets and seals needed to re-seal an engine after extended service hours, restoring compression and preventing oil and coolant leaks. If you are planning an overhaul on a 2-series 2TD or 2TG truck, ordering the 04111-40510-71 for 02-2TD15 and its sister models means every sealing point is renewed in one pass instead of chasing individual gaskets later.

Compatibility

This engine overhaul gasket kit fits the Toyota 2TD and 2TG forklift series:

• 02-2TD15 / 02-2TD18 – 1.5 to 1.8 tonne diesel trucks
• 02-2TD20 / 02-2TD23 / 02-2TD25 / 2TD20 – 2.0 to 2.5 tonne diesel trucks
• 02-2TG20 / 02-2TG25 – 2.0 to 2.5 tonne gasoline and LPG trucks

Always confirm the full part number 04111-40510-71 against your truck’s data plate before ordering, as engine configurations can vary within a series.

Quality and Reliability

An engine overhaul is labor-intensive, so the gaskets you fit need to survive it. This kit is produced to Toyota’s material and dimensional specifications, using sealing materials selected for the temperatures and pressures inside these engines. Correct gasket thickness preserves critical clearances such as deck height and crush limits, which in turn protects compression, oil control, and cooling performance after the rebuild.

Installation and Maintenance Tips

• Strip the engine fully and clean every mating surface; old gasket residue is the most common cause of new gasket failure.
• Check the cylinder head and block for flatness and damage before fitting new gaskets.
• Follow the Toyota workshop manual for torque values and tightening sequences, especially on the cylinder head.
• Fit the gaskets and seals from the kit as a complete set rather than reusing any component.
• After the overhaul, follow the recommended run-in procedure and change the engine oil and filter at the first service interval.

Why Order from Us

ForkliftPartsSearch.com focuses exclusively on forklift spare parts, so our team understands the fitment questions that general suppliers often miss. When you order the 04111-40510-71 GASKET KIT, ENGINE O/H from us, you get a part specified for the Toyota 2TD and 2TG series, help confirming compatibility with your truck’s model and serial number, and straightforward support from people who work with forklift engines every day. Browse our catalog for related engine components to complete your overhaul in a single order.