0009810910 Pump-Motor Unit for Linde L10 L12 L14AP L14C
Overview
The 0009810910 pump-motor unit is the complete hydraulic lift assembly for Linde L-series electric pallet trucks. Combining the lift motor and hydraulic pump in a single housing, this component powers raising and lowering of the forks on the Linde L10, L12, L14AP and L14C. When a pallet truck starts to lift slowly, stalls under load, or fails to lift at all, a worn pump-motor unit is one of the most common causes. Fitting a new 0009810910 pump-motor unit restores dependable lift performance and helps extend the working life of the truck.
Compatibility
This 0009810910 pump-motor unit is specified for the following Linde electric pallet trucks:
- Linde L10
- Linde L12
- Linde L14AP
- Linde L14C
All four models belong to the Linde L-series family of compact electric pallet trucks used in warehouses, loading bays and retail back-of-house operations. Because these trucks share the same lift-hydraulics platform, the 0009810910 for L10 likewise covers the L12, L14AP and L14C variants listed above. Before ordering, compare the number marked on your existing unit with 0009810910, or send us your truck serial number and we will gladly help you confirm fitment.
Quality and Reliability
The Linde L-series is known for robust engineering, and a replacement pump-motor unit has to match that standard. This 0009810910 replacement is produced to the original mounting dimensions, hydraulic flow rate and electrical characteristics of the factory-fitted unit, so it lines up with existing brackets, hoses and connectors without modification. Consistent lift speed and stable load handling depend on precise tolerances between the motor, pump gears and hydraulic circuit, which is why the 0009810910 pump-motor unit is supplied as a matched assembly rather than pieced together from separate parts. Using a correctly matched Linde-specification assembly also reduces the risk of repeat failures and unnecessary downtime.
Installation and Maintenance Tips
- Disconnect the battery and support the truck safely before starting any work.
- Release the hydraulic pressure and drain the reservoir before removing the old unit.
- Replace seals and O-rings during reassembly and keep the hydraulic oil clean and at the correct level.
- Inspect wiring terminals for corrosion and make sure all connectors are fully seated afterwards.
- Bleed air from the hydraulic circuit and run several no-load lift cycles to verify smooth operation.
If you are not equipped for hydraulic repairs, have the 0009810910 pump-motor unit fitted by a qualified forklift technician.
Why Order from Us
forkliftpartssearch.com specialises in forklift spare parts, including hard-to-find components like the 0009810910 pump-motor unit for Linde pallet trucks. We focus on accurate part identification, clear fitment information and a straightforward ordering process, so you can get your L10, L12, L14AP or L14C back in service with minimum downtime. Not sure whether this is the right part? Send us your part number and truck details and we will help you verify it before you buy.