Linde 1894405325 Lift Cylinder Assy. 2792 mm for E35–E45 EX
Overview
The 1894405325 lift cylinder assy. 2792 mm is a complete hydraulic lift cylinder assembly specified for selected Linde electric counterbalance forklifts. With an overall length of 2792 mm, this assembly converts hydraulic pressure into the lifting force that raises the mast and the load. When a lift cylinder starts to leak, drift under load or lose pressure, replacing it with a correctly specified assembly is essential for safe, predictable lifting performance.
Compatibility
The 1894405325 for E35, E40 and E45 trucks serves the following Linde electric forklift variants:
- E35 EX 3GD
- E40 EX 3GD
- E45 EX
These models belong to Linde’s E35/E40/E45 EX series, a range of 3.5 to 4.5 tonne electric counterbalance trucks that also includes the explosion-protected EX variants. Because mast configurations and truck specifications can vary within a series, always confirm the model code and serial number on your truck’s chassis plate before ordering. If the plate shows one of the model codes listed above, this 1894405325 lift cylinder assy. 2792 mm is the specified replacement for your machine.
Quality and Reliability
Lift cylinders operate under continuous high pressure and heavy dynamic loads, so dimensional accuracy and sealing integrity are critical. This Linde lift cylinder assembly is produced to match the original specification, including the 2792 mm overall length, mounting points and hydraulic port positions, so existing hoses, pins and mast hardware line up as intended. Ordering by the exact part number rather than substituting a similar-looking cylinder helps protect the mast, chains and hydraulic pump from unnecessary strain and keeps the truck operating as the manufacturer intended.
Installation and Maintenance Tips
- Park the forklift on level ground, fully lower the forks and depressurize the hydraulic system before starting work.
- Securely support the mast and carriage; a lift cylinder assembly is a heavy component and should be handled with suitable lifting equipment.
- Compare the removed cylinder with the new assembly, checking the 2792 mm overall length, mounting style and port connections.
- Inspect surrounding hoses, fittings and seals, and replace any worn components while the cylinder is accessible.
- After installation, bleed air from the hydraulic circuit, then test through the full lift range and check for leaks under load.
- Always follow the manufacturer’s service manual, torque values and local safety regulations.
Why Order from Us
forkliftpartssearch.com specializes in forklift spare parts for professional fleets, service workshops and dealers. Our catalogue covers Linde components across electric and internal combustion truck ranges, and every listing is built around exact part numbers so you can match what you need to what you order. If you are unsure whether the 1894405325 lift cylinder assy. 2792 mm fits your truck, send us your model and serial number and our team will help you confirm fitment before you buy.