Toyota 04111-40500-71 Engine Overhaul Gasket Kit 2TD/2TG

Overview

The Toyota 04111-40500-71 GASKET KIT, ENGINE O/H is a complete gasket set for engine overhaul work on Toyota forklifts and tow tractors. An engine rebuild is only as reliable as its seals: every head, cover, pan and manifold joint has to hold against oil, coolant and combustion pressure from the very first start-up. This kit consolidates the gaskets required for a full overhaul into a single Toyota part number, so your technician can complete the rebuild without chasing individual gaskets one by one. If you are refreshing a high-hour truck such as an 02-2TD15, the 04111-40500-71 takes the guesswork out of ordering sealing components.

Compatibility

The 04111-40500-71 for 02-2TD15 and the rest of the covered range fits two Toyota series:

• 2TD series: 02-2TD15, 02-2TD18, 02-2TD20, 02-2TD23, 02-2TD25 and 2TD20. The 2TD20 appears in Toyota parts documentation both with and without the 02- prefix.
• 2TG series: 02-2TG20 and 02-2TG25.

Before ordering, confirm your truck’s model code and serial number against the Toyota parts catalog to make sure this engine overhaul gasket kit matches your engine configuration. If your records show a different reference, cross-check it against 04111-40500-71 before you buy. Not sure which kit you need? Send us your data plate details and we will help you verify the correct part number.

Quality and Reliability

Gaskets are precision components, and small deviations in thickness, material or compression characteristics show up quickly as oil weeps, coolant loss or low compression. Toyota-branded parts such as the 04111-40500-71 are manufactured to the original specifications for dimensions and sealing material, so each gasket seats and seals the way the engine was designed for. Because the kit supplies matched gaskets for the whole engine, you can reseal every joint in one overhaul with consistent quality across the assembly, which matters when head, pan and cover surfaces are cleaned, machined or replaced during the same rebuild.

Installation and Maintenance Tips

• Strip the engine in a clean work area and keep all mating surfaces protected throughout the rebuild.
• Remove every trace of old gasket material and sealant without scoring or gouging the sealing faces.
• Never reuse old gaskets or seals: fit the complete 04111-40500-71 kit in one overhaul.
• Follow the Toyota workshop manual for gasket orientation, sealant requirements and bolt tightening sequence, and use a calibrated torque wrench.
• After the first heat cycle, inspect for oil or coolant seepage and re-check fastener torque where the manual specifies.

Why Order from Us

forkliftpartssearch.com specializes in forklift spare parts, so you get fast, accurate help identifying the right component for your truck. We supply Toyota parts for popular series such as the 2TD and 2TG, help you cross-check model codes and serial numbers before you order, and keep overhaul components like the 04111-40500-71 GASKET KIT, ENGINE O/H easy to source. Place your order today and keep your engine rebuild on schedule.