Toyota 04112-20190-71 GASKET KIT, ENGINE VALVE GRIND | 2TD

Overview

The 04112-20190-71 GASKET KIT, ENGINE VALVE GRIND is a Toyota service gasket set for a complete top-end overhaul — commonly called a valve grind — on Toyota internal combustion forklifts. Whenever the cylinder head is removed for valve lapping or resurfacing, the head gasket and its associated seals are disturbed and should never be reused. This kit consolidates the required sealing components under one Toyota part number, so a technician can complete the valve grind in a single planned service instead of hunting for individual gaskets. If you maintain a mixed fleet of Toyota 2TD and 2TG trucks, this is the reference number to keep on file for engine valve grind work.

Compatibility

The 04112-20190-71 for 02-2TD15 and its sister models serves the following Toyota forklift series:

• 2TD series: 02-2TD15, 02-2TD18, 02-2TD20, 02-2TD23, 02-2TD25 and 2TD20
• 2TG series: 02-2TG20, 02-2TG25

These Toyota counterbalance trucks share the same engine family, which is why one valve grind gasket kit covers the whole range. Before ordering, check your truck’s model code and serial number on the nameplate against the list above, or send us the chassis number and we will confirm the correct kit for your engine.

Quality and Reliability

A valve grind kit is only as good as its weakest gasket. Every sealing element in this set is built to Toyota specification for the 2TD and 2TG engine family, so it stands up to combustion pressure, heat cycling and constant exposure to oil and coolant. Accurate cut-outs and correct crush characteristics help the gaskets seal evenly across the mating faces, reducing the risk of leaks or a repeat teardown. Ordering against the exact Toyota part number — 04112-20190-71 — is the most dependable way to avoid fitment problems during reassembly.

Installation and Maintenance Tips

• Clean both mating surfaces thoroughly; leftover gasket material, carbon or corrosion will compromise the new seal.
• Follow the Toyota service manual for head bolt torque values and the tightening sequence, and re-torque where the manual specifies.
• Inspect the head and block faces for flatness and damage while the engine is open.
• Refresh the coolant and check oil condition after the job, then monitor for leaks during the first hours of running.
• Store the kit flat and sealed until use to protect gasket edges.

Why Order from Us

for liftpartssearch.com specialises in Toyota forklift parts, and the 04112-20190-71 GASKET KIT, ENGINE VALVE GRIND is a standard line we supply to dealers, service workshops and fleet operators. Our team verifies part numbers against model and serial data before dispatch, can help you cross-reference related engine gaskets and filters for the same service visit, and packs each order so delicate gaskets arrive in good condition. Send us your truck details or the part number, and we will take it from there.