50026192 Hydraulic Hose, Jungheinrich CD 22-33 Forklifts

Overview

The 50026192 Hose, Hydraulic is a replacement hydraulic hose for selected Jungheinrich electric counterbalance forklifts. Hydraulic hoses carry pressurized oil between the pump, control valve, lift cylinders and other components of the lifting circuit, so a cracked, chafed or leaking hose quickly shows up as slow lifting, pressure loss or fluid on the floor. If you are looking for the 50026192 for 50059003 or one of the other compatible Jungheinrich references, this hose is supplied to match the original fitment in length, end fittings and connection type.

Compatibility

The 50026192 Hose, Hydraulic is listed for the following Jungheinrich trucks and type codes:

• CD 22-33 series – Jungheinrich electric counterbalance forklifts in the 2.2 to 3.3 tonne class
• CL 16-20 series – compact Jungheinrich electric counterbalance trucks in the 1.6 to 2.0 tonne class
• C/H designation – listed alongside the above series in Jungheinrich fitment data
• Associated Jungheinrich type codes: 50059003, 9811460/50026159 and 9844465/50026446

Because Jungheinrich trucks were produced over many years with running changes, always check the number stamped on your current hose or the part number in your truck’s spare parts documentation before ordering. If you are not certain, send us your forklift model and serial number and our team will confirm the correct hose for your truck.

Quality and Reliability

A hydraulic hose is only as good as its fit. The wrong length can stretch or kink, incorrect fittings will not seal properly, and mismatched pressure ratings put the whole circuit at risk. The 50026192 Hose, Hydraulic offered here is selected to align with the original Jungheinrich specification for these CD and CL series trucks, so it can be installed as a direct replacement without improvising adapters or re-routing lines. Sourcing focuses on suppliers with a proven record in forklift hydraulics, giving you a hose suited to daily warehouse and industrial work.

Installation and Maintenance Tips

Use the following checkpoints when fitting the new hose:

• Depressurize the hydraulic system and disconnect the battery before starting work
• Position absorbent mats or trays under the work area to catch residual oil
• Route the new hose exactly along the original path, clear of sharp edges and hot surfaces
• Hold the fitting with a second wrench while tightening to avoid twisting the hose
• After fitting, raise and lower the mast slowly and inspect every connection for leaks at working pressure
• During routine service, check hoses for abrasion, bulges, cracked covers or weeping fittings and replace them before they fail

Why Order from Us

forkliftpartssearch.com specializes in Jungheinrich spare parts, including hard-to-find references such as the 50026192. Our team works with forklift hydraulics every day, so we can help you verify fitment quickly and keep your downtime short. You get clear product data, straightforward ordering and responsive support before and after your purchase. Order the 50026192 Hose, Hydraulic today and keep your Jungheinrich forklift lifting reliably.