Linde 0009509708 Double Hose Line 3273 mm for E14-E20P

Overview

The 0009509708 double hose line 3273 mm is a hydraulic hose assembly specified by Linde for its electric counterbalance forklift range. As a double line, it carries two hydraulic circuits in a single routed assembly, feeding fluid between the pump, control valves and lift cylinders. A worn or damaged hose can quickly cause pressure loss, slow lifting or visible leaks, so fitting the correct Linde part number restores the original length, routing and fitting configuration.

Compatibility

The 0009509708 for E14 and its sibling models covers the Linde E14–E20 electric truck series:

• E14 / E16 group: E14, E16, E16C, E16CH, E16P
• E18 / E20 group: E18C, E18P, E20P

These compact electric trucks are common in warehouse and light manufacturing fleets, so a correctly specified hose line keeps daily operations moving. Before ordering, check the part number on your existing assembly or confirm the reference in your truck’s parts manual. Hose routings and lengths were occasionally revised during production, so checking your serial number is the safest way to ensure a direct fit. If unsure, send us your data plate details and we will confirm whether the 0009509708 double hose line 3273 mm matches your truck.

Quality and Reliability

Hydraulic lines operate under constant pressure cycles, so the quality of the hose, the crimps and the end fittings directly affects both safety and uptime. This 3273 mm double hose line is produced to the dimensions, fitting types and routing defined by Linde for the E14–E20 electric series, so it aligns with the mounting points and clamp positions of the original installation. Using the correct specified assembly helps avoid stretched lines, chafing against the chassis and leaks at the fittings — common problems when a substitute hose of the wrong length or configuration is fitted. Matching the original part number is the most reliable route to consistent hydraulic performance.

Installation and Maintenance Tips

• Fully lower the mast, depressurize the hydraulic circuit and disconnect the battery before starting work.
• Photograph or note the original routing, clamp positions and fitting orientation before removing the old line.
• Respect the 3273 mm length: a shorter line places tension on the fittings, while a longer one can rub against structural parts.
• Fit new sealing elements where required and tighten the fittings to the specified torque.
• After installation, check every connection for leaks and re-inspect the line regularly for abrasion, hardening or weeping fittings as part of your service routine.

Why Order from Us

We specialize in forklift spare parts, with deep coverage of Linde electric trucks from the E14 through to the E20P. When you order the 0009509708 double hose line from us, you benefit from accurate part identification, knowledgeable support if you need help confirming fitment, and a streamlined ordering process built for maintenance teams, dealers and fleet operators. Our catalog is structured around genuine part numbers, making the right component easy to find. Keep your Linde forklift lifting safely and efficiently — order the correct hose line today.