Linde 0009505758 Double Hose Line 4648 mm for E14 E16

Overview

The 0009505758 double hose line 4648 mm is a replacement dual-hose assembly specified for Linde electric forklifts. At 4648 mm — roughly 4.65 metres — it is made to the original length and fitting layout, so it routes like the factory-installed hose rather than an improvised substitute. When a double hose line becomes chafed, brittle or starts to leak, replacing it with the correct Linde part number is the surest way to restore safe, dependable performance. If you have been searching for the 0009505758 for E14 or its sister models, this page gives you everything you need to order with confidence.

Compatibility

This double hose line is specified for the Linde E14–E20P electric counterbalance series. Fitment covers:

• E14 — the entry model of the range
• E16 family — E16, E16C, E16P and E16CH variants
• E18 and E20 variants — E18C, E18P and E20P

Configurations within the series can differ by chassis number and build year, so we recommend confirming fitment against your truck’s nameplate or serial number before ordering. If in doubt, send us your model and serial number and our team will verify that the 0009505758 is the correct match.

Quality and Reliability

A double hose line endures constant pressure cycles, vibration, abrasion and weather exposure, so build quality matters. The 0009505758 is a Linde part number, and this hose line follows the original specification for length, diameter, fittings and routing. That translates into practical benefits: the 4648 mm line seats correctly in its clips, avoids unnecessary tension and tight bends, and helps keep connections tight under pressure. Replacing a worn hose line before it fails also protects adjacent components from oil contamination and reduces the risk of unplanned downtime on a busy shift.

Installation and Maintenance Tips

• Depressurise the hydraulic system and fully lower the mast and forks before disconnecting any hose.
• Photograph or note the original routing before removing the old line; the 4648 mm length is designed to follow a defined path.
• Lay the old and new assemblies side by side to confirm length and fittings before installation.
• Route the new double hose line away from sharp edges and pinch points, securing it with the original clips and brackets.
• After fitting, check every connection for leaks and re-inspect after the first hours of operation.
• During scheduled service, look for abrasion, cracks, bulges or weeping fittings and replace the line early rather than waiting for failure.

Why Order from Us

forkliftpartssearch.com specialises in forklift spare parts, so enquiries about numbers like 0009505758 are handled by people who know what they mean. When you order the Linde 0009505758 double hose line 4648 mm from us, you benefit from exact part-number sourcing, help verifying fitment against your model and serial number, and a catalogue covering Linde electric trucks from the E14 to the E20P and beyond. Keep your fleet moving with the right part and a straightforward ordering process from search to checkout.