Linde 330-01 CHASSIS BODYWORK AND FITTINGS Parts Diagram
View SVG exploded diagram references and parts positions for this Linde assembly. 330-01 CHASSIS BODYWORK AND FITTINGS.
This assembly page is currently set to noindex while parts-row rendering is being indexed and optimized.
CHASSIS BODYWORK AND FITTINGS
SVG asset URL is not configured for this assembly yet.
Parts List
| POS | Part No | Part Name | Qty | Remarks |
|---|---|---|---|---|
| 3304003000 | 1 | Including from series 7/79:,Pos. 1-4 1-Bearing Holding piece 330.440.75.01 4-Hex. head bolt M8x16 9.008.311.177 4-Washer 8.4x21x4 DIN 7349-9 309.412.018 Including from series 9/79: 1-Battery carrier 330.420.35.02 and new exhaust system see SI 21/79 | ||
| 3304003001 | chassis assy. | 1 | similar to 1-4 to series 11/81 rework is required for welding on 2 Holding pieces 000.918.79.19 | |
| 3304003005 | chassis assy. | 1 | similar to 1-4 from series 12/81 | |
| 3304003006 | chassis assy. | 1 | similar to 1-4 from 330 205 0001 | |
| 0009381798 | label load capacity H12 | 1 | similar to 23 from series 10/79 Triplex H 12 | |
| 0009381345 | capacity rating plate H12 | 1 | sim. 23 | |
| 0009381799 | label load capacity H15 | 1 | similar to 23 from series 10/79 Triplex H 15 | |
| 0009381346 | capacity rating plate H15 | 1 | sim. 23 | |
| 0009381875 | label Michelin-Reifen | 1 | for 23 | |
| 2 | 9007311308 | hexagon head screw M12x60-8.8-ZNS | 4 | |
| 3 | 9148056216 | screw plug M24x1,5-5.8 | 1 | |
| 4 | 9636801269 | seal ring A24x29-Cu | 1 | |
| 5 | 3304307000 | overhead guard assy. | 1 | Parts being phased out |
| 5 | 3304307001 | overhead guard assy. | 1 | Parts being phased out |
| 5 | 3304307005 | overhead guard assy. | 1 | Restricted availability |
| 5a | 3304320575 | damping mat | 1 | |
| 5b | 3304362800 | cover sheet | 1 | |
| 5c | 0009082306 | blind rivet 4,8x15,6x1,8Al | 11 | |
| 6 | 9380620793 | slotted spring pin 28x22-ST | 2 | |
| 7 | 9309412028 | washer 17-ST50-ZNS | 4 | |
| 8 | 9007311414 | hexagon head screw M16x60-8.8-ZNS | 2 | |
| 9 | 9210281160 | hexagon nut M16-8-ZNS | 2 | |
| 10 | 9008311406 | hexagon head screw M16x30-8.8-ZNS | 2 | |
| 11 | 9323620028 | spring washer B16-ZNS | 2 | |
| 12 | 3306130300 | counterweight top | 1 | Restricted availability to 330 012 0000 |
| 12 | 3306130310 | counterweight top | 1 | Restricted availability to 330 012 0000 |
| 12a | 3306130320 | counterweight | 1 | Restricted availability from 330 012 0001 |
| 12a | 3306130325 | counterweight | 1 | Restricted availability from 330 012 0001 |
| 12a | 3306130330 | counterweight | 1 | Restricted availability from 330 012 0001 |
| 12a | 3306130335 | counterweight | 1 | Restricted availability from 330 012 0001 |
| 13 | 3306130305 | counterweight below | 1 | Restricted availability to 330 012 0000 |
| 13 | 3306130315 | counterweight below H15 | 1 | Restricted availability to 330 012 0000 |
| 14 | 9008311533 | hexagon head screw M20x80-8.8-ZNS | 4 | |
| 15 | 9309412033 | washer 21-ST50-ZNS | 4 | |
| 16 | 9045341422 | socket head screw M16x100-10.9 | 3 | to 330 012 0000 |
| 17 | 0009121164 | bolt 30x210-Gew | 1 | to 330 004 0000 |
| 17 | 0009121182 | bolt 30x270 | 1 | from 330 004 0001 - 330 012 0000 |
| 17a | 0009121189 | bolt 25x200 | 1 | from 330 012 0001 |
| 17b | 0009187287 | retainer plate | 1 | from 330 012 0001 |
| 17c | 0009213028 | spring 3x31x37,3 | 1 | from 330 012 0001 |
| 17d | 9008311177 | hexagon head screw M8x16-8.8-ZNS | 1 | from 330 012 0001 |
| 18 | 3304213800 | rod | 1 | to 330 012 0000 secured with Loctite No. 241 |
| 19 | 3304013800 | 1 | to series 9/78 Including: 2-Hex. head bolt M20x90 DIN 931-10.9 9.007.341.535 2-Lock washer B20 DIN 137 9.323.620.033 2-Washer 21 DIN 7349 St A2C 9.309.412.033 2-Clamping sleeve 25x45 DIN 7346 9.384.620.767 | |
| 19 | 3304013805 | rod | 1 | from series 10/78 |
| 20 | 9011312692 | hexagon head screw M24x2x80-8.8 | 2 | to series 9/78 |
| 20 | 9007341535 | hexagon head screw M20x90-10.9 | 2 | from series 10/78 |
| 21 | 9323620038 | spring washer B24-ZNS | 2 | to series 9/78 |
| 21 | 9323620033 | spring washer B20-ZNS | 2 | from series 10/78 |
| 21b | 9309412033 | washer 21-ST50-ZNS | 2 | from series 10/78 |
| 21c | 9384620767 | slotted spring pin 25x45 | 2 | from series 10/78 |
| 22 | 9124311241 | threaded stud M10x30-8.8-ZNS | 4 | mounted with Loctite nr.243 |
| 23 | 0009381779 | label | 1 | to series 4/78 |
| 23 | 0009381795 | label operatingsymbols | 1 | from series 5/78 |
| 23 | 0009381308 | label operatingsymbols | 1 | for new mast types 150/151/152 |
| 23 | 0009381309 | capacity rating plate | 1 | Parts being phased out |
| 23 | 0009381352 | capacity rating plate | 1 | to series 3/84 |
| 23 | 0009381376 | capacity rating plate | 1 | Parts being phased out from series 4/84 |
| 23 | 0009381400 | capacity rating plate | 1 | |
| 23 | 0009381780 | label | 1 | to series 4/78 |
| 23 | 0009381796 | label operatingsymbols | 1 | from series 5/78 for new mast types 150/151/152 |
| 23 | 0009381310 | capacity rating plate | 1 | Parts being phased out |
| 23 | 0009381353 | capacity rating plate | 1 | to series 3/84 |
| 23 | 0009381377 | capacity rating plate | 1 | Parts being phased out from series 4/84 |
| 23 | 0009381401 | capacity rating plate | 1 | |
| 24 | 0009620104 | sealing plug 28,8x20 | 3 | to 330 012 0000 |
| 25 | 0009620105 | sealing plug 7,3x9,5-BK | 7 | |
| 26 | 3304320582 | damping mat rear | 1 | from 330 012 0001 in counterweight |
| 27 | 3304320588 | damping mat | 1 | from 330 012 0001 in counterweight (for exhause opening) |
| 28 | 0009620156 | sealing plug | 2 | |
| 29 | 0009642132 | washer 56x100x2Gu | 1 | version LPG |