51381082 Cylinder, Brake for 2EP(C)5000-2EP(C)6500 & EFG
Overview
The 51381082 Cylinder, Brake is a hydraulic brake cylinder replacement designed for electric forklifts working in warehouses, distribution centers, and manufacturing facilities. Supplied under the jh brand, this component converts hydraulic pressure into the mechanical force that presses the brake shoes against the drum, delivering the controlled stopping power a loaded lift truck depends on.
When a brake cylinder begins to weep fluid or lose pressure, operators notice a soft or spongy brake pedal and longer stopping distances — symptoms no safety-minded operation should ignore. Replacing a worn cylinder with the 51381082 Cylinder, Brake restores firm, consistent braking response and helps protect operators, loads, and equipment. Because brake hydraulics are a core safety system, this cylinder is dimensioned for the model series listed below, so you can order knowing it is intended to bolt up and function like the original.
Compatibility
The 51381082 brake cylinder is specified for the following forklift series:
- 2EP(C)5000-2EP(C)6500 series
- EFG 425-430 series, including the EFG 425-430 (US) and EFG 425-430/ versions
Regional and production-year variations in braking hardware do occur. If you are unsure whether the 51381082 for 2EP(C)5000-2EP(C)6500 is right for your truck, send us your model and serial number and we will verify fitment before you order.
Quality and Reliability
jh replacement parts are manufactured to match the fit, dimensions, and function of the original components they replace. For the 51381082 Cylinder, Brake, that means a precisely machined bore for smooth piston travel, resilient internal seals that stand up to hydraulic fluid, and a durable exterior finish suited to the dust and humidity of everyday warehouse operation. Consistent braking performance starts with consistent component quality, and choosing a purpose-built replacement cylinder over a generic approximation helps keep your brake system predictable under load.
Installation and Maintenance Tips
- Relieve hydraulic system pressure and follow lockout procedures in your service manual before starting work.
- Keep the work area around the cylinder clean so no debris enters the hydraulic circuit.
- Replace seals, springs, or worn hardware in the same service event rather than reusing degraded parts.
- Bleed the brake circuit after installation to remove trapped air and achieve a firm pedal.
- Check the reservoir fluid level and inspect for leaks after the first test operation.
- Always follow the manufacturer’s torque specifications and safety procedures.
Why Order from Us
At forkliftpartssearch.com, forklift replacement parts are all we do. Our team understands model-level fitment differences, can help you cross-reference part numbers like 51381082, and will verify the right part for your specific truck before purchase. With a deep catalog covering major electric forklift series and responsive support from experienced parts specialists, we make it simple to keep your fleet stopping safely. Order the 51381082 Cylinder, Brake today and get your equipment back in service with confidence.