50451501 Cylinder, Lift for Jungheinrich DFG 60/70 DK
Overview
The 50451501 Cylinder, Lift is a replacement hydraulic lift cylinder for selected Jungheinrich forklifts. As the core of the mast hydraulics, the lift cylinder converts hydraulic pressure into the vertical force that raises, lowers and holds the fork carriage under load. When a cylinder begins to leak, drift or lose pressure, lifting speed drops and safe load handling suffers. Fitting the correct 50451501 lift cylinder restores smooth, consistent lifting performance and helps protect the pump, hoses and valves from unnecessary strain.
Compatibility
The 50451501 for DFG equipment is specified for the following Jungheinrich series:
- DFG 60/70 DK series – diesel forklifts, Ser.Nr. 5250 and later (5250>>>)
- EJC 212 series – electric forklifts
No OEM cross-reference numbers are published for this part, so order by the Jungheinrich part number 50451501 together with your truck’s model and serial number. Jungheinrich revised components several times within these series, and our team will gladly verify fitment from your data plate details.
Quality and Reliability
This replacement cylinder is built to match the Jungheinrich original design in bore, stroke, mounting dimensions and working pressure, so it installs in place of the worn unit without mast modifications. Typical construction includes a precision-honed barrel, a hard-chrome-plated piston rod for extended seal life and a seal set rated for intensive hydraulic duty. Consistent manufacturing tolerances deliver reliable lifting, minimal internal leakage and predictable load control over a long service life.
Installation and Maintenance Tips
Before fitting the 50451501 lift cylinder, follow good workshop practice:
- Park on level ground, lower the forks fully and relieve hydraulic pressure before starting work.
- Securely support the mast section – lift cylinders are heavy and can hold residual force even when depressurized.
- Disconnect the hydraulic line and cap the hose and cylinder port immediately to keep dirt out of the circuit.
- While the cylinder is out, inspect hoses, fittings and mast rollers and replace any worn parts at the same time.
- After installation, bleed the circuit, cycle the mast through full lift and lower, and check for leaks around the rod seal and fittings.
- Keep hydraulic oil clean and the piston rod free of scoring – contaminated oil is the most common cause of premature cylinder wear.
Why Order from Us
forkliftpartssearch.com specializes in forklift spare parts, with in-depth coverage of Jungheinrich components for diesel, LPG and electric trucks. When you order the 50451501 Cylinder, Lift from us, you benefit from:
- Accurate part-number matching against your model and serial number
- Specialist support to confirm fitment before you buy
- A broad Jungheinrich catalogue covering hydraulics, mast parts, filters and wear parts
- Clear product data so you order the right part the first time
Order the 50451501 lift cylinder today and put your Jungheinrich truck back to work with full, dependable lifting performance.