0009550841 Hose Clamp for Linde H20D, H25D & H30D Forklifts

Overview

The 0009550841 hose clamp is a replacement fastening component for Linde industrial forklifts. Hose clamps are small but critical parts: they hold hoses firmly against fittings, ports and pipes so that fluid-carrying circuits stay sealed under pressure, heat and vibration. When a clamp fatigues or loses tension, the result is often a slow weep of coolant, fuel or hydraulic oil that escalates into overheating, pressure loss or unplanned downtime. Because this clamp carries the exact Linde number 0009550841, you can match it directly against the parts diagram for your machine without guesswork.

Compatibility

The 0009550841 hose clamp fits the Linde H20 to H30 counterbalance series:

• H20 / H25 / H30 D-series – H20D, H25D and H30D trucks, including EX variants
• H20T – the same clamp also suits the H20T truck

This makes the part a frequent search as “0009550841 for H20D” among fleet engineers servicing these trucks. Before ordering, confirm the number against your truck’s parts manual, or send us your model and serial number so our team can verify the fit. Hose clamps differ in diameter range, band width and screw type, and two clamps that look nearly identical may not seal the same joint correctly.

Quality and Reliability

A forklift hose clamp works in a hostile environment: engine-bay heat, cold starts, moisture, detergents and constant vibration. The 0009550841 hose clamp is made to match the fit and function of the original Linde component, with dimensions that seat correctly on the original hose and fitting. Consistent band geometry and smooth screw threads let you apply even, repeatable clamping force — enough to hold the joint securely without crushing or cutting the hose wall. Because it carries the true Linde part number 0009550841, it can be specified with confidence in service records and planned-maintenance schedules.

Installation and Maintenance Tips

• Relieve system pressure and drain the affected circuit before loosening the hose, so trapped pressure cannot cause injury.
• Slide the new clamp onto the hose before pushing the hose fully home onto the fitting, then position the band just behind the bead or barb.
• Tighten the screw evenly until the hose is held firmly, and check that the band sits square rather than twisted.
• Inspect clamps at each service for corrosion, cracked bands or stripped threads, and replace the clamp whenever you fit a new hose.
• Do not re-tension a tired clamp; a fresh 0009550841 hose clamp costs far less than a blown hose or a damaged fitting.

Why Order from Us

forkliftpartssearch.com specialises in forklift spare parts for Linde and other leading brands. Searching by part number gets you the component matched to that exact reference — the 0009550841 hose clamp for the H20D, H25D, H30D and H20T trucks in the Linde H range. Our parts specialists know the Linde model codes and can cross-check a model or serial number before you order, helping you avoid costly mis-orders and repeat downtime. Add this clamp to your next scheduled service, or order it today so the right part is on the shelf when the truck comes in.