1804405312 Linde Lift Cylinder Assy 1608 mm for E14-E20P

Overview

The Linde 1804405312 lift cylinder assy. 1608 mm is a complete hydraulic lift cylinder assembly for Linde electric counterbalance forklifts in the E14 to E20P range. Produced to the original 1608 mm length and mounting geometry, it is intended to replace a worn or leaking cylinder without modification to the mast or carriage. Typical signs of a failing lift cylinder include slow or uneven lifting, mast drift under load and visible oil loss. Fitting a fresh assembly restores smooth, controlled lifting and helps protect the rest of the hydraulic circuit.

Compatibility

The 1804405312 for E14 and the surrounding Linde electric truck family fits the following model groups:

• Linde E14 electric counterbalance forklifts
• Linde E16 series – E16, E16C, E16CH and E16P
• Linde E18 series – E18C and E18P
• Linde E20P electric forklifts

Before ordering, always confirm the reference against your truck’s data plate and frame number. As no additional OEM cross-reference numbers are published for this part, 1804405312 is the definitive number to quote when checking fitment with our team.

Quality and Reliability

As a Linde application part, the 1804405312 lift cylinder is manufactured to match the original drawing in barrel length, piston travel, mounting points and port positions. This dimensional accuracy keeps chain geometry and mast alignment correct, which is essential for safe load handling. The assembly combines a honed cylinder bore, a ground and hard-chrome-plated piston rod and a seal set designed for continuous hydraulic duty, helping it hold load height reliably over long shifts and reducing the risk of premature internal leakage.

Installation and Maintenance Tips

• Depressurize the hydraulic system and fully lower the mast before starting work; secure the forks so nothing can move during removal.
• Support the mast and chains, then disconnect the hydraulic hose and plug the line to keep contamination out.
• Compare the new 1804405312 cylinder with the old unit – overall 1608 mm length, mounting brackets and hose port – before final fitting.
• Torque fittings to specification, replace any suspect O-rings on the connections and refill with clean hydraulic fluid of the grade Linde specifies.
• After installation, cycle the mast slowly several times to bleed trapped air, then check for leaks at the fittings and rod seal.
• Keep the piston rod clean and inspect it regularly for scoring or corrosion, the most common causes of premature seal failure.

Why Order from Us

forkliftpartssearch.com focuses on Linde forklift parts, so our team knows exactly what a reference like 1804405312 means. If you are unsure whether this lift cylinder assy. matches your E14, E16 or E18 truck, send us your nameplate details or frame number and we will confirm fitment before you order. Alongside hydraulic components, our catalog covers Linde drive, brake, steering and filter parts, making it easy to consolidate orders and get your forklift back in service with parts you can rely on.