Linde 1804401857 Lift Cylinder Assy. 1062mm-Ø50 | L-Matic

Overview

The 1804401857 lift cylinder assy. 1062mm-Ø50 is a replacement hydraulic lift cylinder assembly for selected Linde electric forklifts, including the L-matic range. Built to the original specification of 1062 mm in length with a 50 mm bore, this assembly delivers the lifting force your mast depends on during every load cycle. If your current cylinder shows external leaks, a scored rod, slow or uneven lifting, or mast drift under load, fitting a correctly matched unit such as this one is the surest way to restore safe, consistent lift performance.

Compatibility

The 1804401857 for L-matic equipment is listed for a family of Linde electric trucks, grouped below:

• Linde L-matic series, used in pallet truck applications
• Linde L06AC to L16AC series, covering the L06AC, L10AC, L12AC and L16AC variants
• Linde L10 models
• Linde EX models

Before ordering, confirm that 1804401857 matches the number stamped on your existing cylinder or quoted in your truck’s parts manual. No substitute OEM numbers are published for this part, so the part number itself is the definitive fitment reference.

Quality and Reliability

Lift cylinders sit at the heart of mast safety, so dimensional accuracy matters. This assembly is produced to match the length, bore diameter and mounting geometry of the original Linde component, allowing it to replace the worn unit without modifying the mast or hydraulic lines. A properly honed bore, sound rod finish and dependable sealing set help resist internal bypass and external leakage under continuous load-holding pressure. Installing a correctly specified cylinder also protects your pump and valve train from avoidable strain and keeps lift speed stable through long shifts.

Installation and Maintenance Tips

• Fully lower the mast and relieve hydraulic pressure before disconnecting any lines.
• Securely support the mast and load backrest; never work beneath an unsupported mast.
• Cap open hydraulic ports immediately to keep contamination out of the system.
• Inspect hoses, fittings and seals while the cylinder is out, replacing marginal parts at the same time.
• After installation, bleed air from the circuit, cycle the lift slowly and check for leaks at the gland and fittings.
• Re-check chain tension and mast rollers, as a new cylinder can slightly alter mast geometry.

Why Order from Us

At forkliftpartssearch.com, we specialize in spare parts for Linde and other leading forklift brands. Our team helps you verify fitment, cross-check part numbers and locate the right components quickly, with clear product data and responsive support at every step. If you are unsure whether the 1804401857 lift cylinder suits your truck, send us your model and serial number and we will help you confirm the correct part before you order.