0574839480 Nylon Hose 3/8in ID for Mitsubishi 4M70 Forklift

Overview

The 0574839480 HOSE NYLON, 3/8in ID M.L.H 209in (5.3M) is a Mitsubishi replacement nylon hose made for heavy-duty forklift applications. With a 3/8-inch inner diameter and an extra-long 209-inch (5.3-meter) length, it is intended for extended line runs where a standard-length hose will not reach. Nylon is a proven material for forklift line work: it stays flexible in demanding conditions, resists abrasion along the frame and mast, and holds up against vibration. If your parts book calls out 0574839480, this hose matches the bore, length, and routing the original circuit was designed around.

Compatibility

This hose fits Mitsubishi forklifts built on the 4M70D engine series, covering the 4M70D40 through 4M70D60 displacement range, as well as the FD35 model. Whether you are searching for 0574839480 for 4M70D40 or for a later D50 or D60 variant, this is the hose listed for your machine. Before ordering, cross-check the part number against your forklift’s serial plate and parts manual; if you need help confirming fitment, our parts specialists are ready to assist.

Quality and Reliability

Because this is a Mitsubishi part, the 0574839480 is produced to the dimensions and tolerances the original equipment was engineered around. The 3/8in ID bore supports the intended flow characteristics, while the full 209in (5.3M) length allows clean, kink-free routing on long frame runs. Nylon construction offers a strong strength-to-weight ratio, good resistance to many industrial fluids and workshop chemicals, and dependable service life when properly clipped and protected. Ordering the correct Mitsubishi part number the first time reduces downtime and prevents the leak paths that come with improvised substitutions.

Installation and Maintenance Tips

• Relieve system pressure and allow the machine to cool before disconnecting the old hose.
• Lay the new hose alongside the original to confirm the 3/8in ID and the 209in (5.3M) cut length before routing.
• Follow the factory routing path and reuse the original clips, sleeves, and chafe guards to prevent contact with hot or sharp surfaces.
• Avoid tight bends and twists, and secure the hose so it cannot shift under load or steering movements.
• Inspect nylon lines at every scheduled service for abrasion, hardening, or cracking, and replace at the first sign of wear.

Why Order from Us

forkliftpartssearch.com specializes in forklift replacement parts, from everyday consumables to hard-to-find items like this 0574839480 HOSE NYLON, 3/8in ID M.L.H 209in (5.3M). Our listings are tied directly to part numbers and model families, so you can search by 0574839480, by the Mitsubishi 4M70D series, or by model codes such as FD35 and reach the right component quickly. We understand forklift downtime and are ready to help you confirm the correct part before you order. Add this Mitsubishi nylon hose to your cart today and keep your 4M70-powered forklifts on the job.