1460004361 CAP-PIVOT for Mitsubishi FB10-FB18 CA Forklifts

Overview

The 1460004361 CAP-PIVOT is a Mitsubishi replacement spare part used on compact electric counterbalance forklifts. The cap seats over a pivot point on the truck, helping to retain the mating joint, keep grease in, and keep dirt and moisture out. Because pivot hardware is exposed to constant loads and vibration during lifting and travel cycles, it can wear or loosen over time. Fitting the correct 1460004361 CAP-PIVOT restores proper fit at the joint and helps protect the shaft and bushings from accelerated wear. If you notice play at the pivot or visible damage to the cap, this is the specified replacement for the models listed below.

Compatibility

The 1460004361 for FB10(H)CA1(J) trucks also fits a closely related group of Mitsubishi electric forklifts. One part number covers two compact families in the 1.0 to 1.8 ton class:

• Mitsubishi FB10/FB14/FB15/FB18 (H)CA1(J) series – including FB10(H)CA1(J), FB14(H)CA1(J), FB15(H)CA1(J) and FB18(H)CA1(J) variants
• Mitsubishi FB10/FB14/FB15/FB18 CA series – covering FB10CA, FB14CA, FB15CA and FB18CA models

Before ordering, check the model and serial plate on your truck to confirm it belongs to one of these series. If you are unsure whether the 1460004361 CAP-PIVOT matches your chassis, our team can help you verify fitment from the part number and model code.

Quality and Reliability

This CAP-PIVOT is supplied under the Mitsubishi brand and manufactured to the specifications of the original component. Dimensional accuracy matters for a pivot cap: an ill-fitting cap can work loose, allow contamination into the joint, or cause uneven wear on mating parts. Using the proper 1460004361 part lets your maintenance team install it without modification and expect the same fit and function as the original.

Installation and Maintenance Tips

• Park the truck on level ground, lower the forks fully, switch off the power and apply the parking brake before starting work.
• Consult the Mitsubishi service manual for the (H)CA1(J) or CA series for removal steps and torque specifications.
• Clean the pivot shaft and the surrounding area before fitting the new cap so dirt cannot enter the joint.
• Inspect the mating shaft, bushings and seals for wear and replace any worn components at the same time.
• Lubricate the pivot point after installation and follow the regular maintenance schedule for the truck.

Why Order from Us

forkliftpartssearch.com is a dedicated forklift parts supplier for material handling professionals. Search by part number, brand or model to locate the 1460004361 CAP-PIVOT quickly, confirm compatibility with your Mitsubishi FB-series electric forklift, and place your order with a team that understands forklift spare parts. Keep your trucks running with the correct part, sourced the straightforward way.