51034368 Hose, Hydraulic for Jungheinrich DFG 40/45/50 CK

Overview

The 51034368 Hose, Hydraulic is a replacement hydraulic hose for Jungheinrich diesel counterbalance forklifts. Hydraulic hoses carry pressurised oil between the pump, control valves and lift cylinders, so a chafed or leaking line quickly affects lifting performance and can halt operations. It is produced to match the Jungheinrich specification for this application — including length, end fittings and connections — so it fits as a direct replacement on the DFG 40 CK, DFG 45 CK and DFG 50. If you are searching for the 51034368 for DFG trucks, you are in the right place.

Compatibility

The 51034368 Hose, Hydraulic fits these Jungheinrich diesel forklifts:

• DFG 40 CK
• DFG 45 CK
• DFG 50

All three belong to the DFG range of diesel counterbalance trucks from Jungheinrich, widely used in warehouses, yards, loading bays and general material handling. For ordering purposes they can be grouped as the DFG 40/45/50 CK series. As Jungheinrich applied the DFG designation across many variants and build years, confirm the part number 51034368 against the marking on your existing hose or the diagram in your service documentation before ordering. If the marking is unreadable, send us your truck’s serial number and our team will help verify fitment.

Quality and Reliability

A hydraulic hose operates in one of the harshest positions on the truck: high system pressure, continuous flexing as the mast moves, and constant exposure to oil, dust and weather. Replacement hoses for this application are made with reinforced lines and matching end fittings to suit the original connections, helping to maintain system pressure and prevent leaks after installation. Fitting a hose specified for the 51034368 for DFG application, rather than an improvised assembly, keeps the hydraulic circuit working as Jungheinrich intended and reduces the risk of premature failure.

Installation and Maintenance Tips

• Fully lower the mast and forks and switch off the truck before starting work.
• Depressurise the hydraulic circuit and allow residual pressure to dissipate.
• Place a container under the work area and expect some oil loss when fittings are opened.
• Note the original routing and bracket positions; the new hose must not twist or rub against the chassis or mast.
• Tighten fittings to the correct torque and replace any damaged O-rings or seals.
• After installation, top up the hydraulic oil, bleed air from the circuit and check for leaks while cycling the lift.

Inspect hydraulic lines regularly for chafing, soft spots or weeping fittings, and replace any damaged hose before it fails in service.

Why Order from Us

forkliftpartssearch.com specialises in forklift spare parts, including a wide range of Jungheinrich part numbers. When you order the 51034368 Hose, Hydraulic from us, you receive accurate product information and support from a team that understands Jungheinrich equipment. We can help you confirm the correct hose before you buy and identify related parts for the same DFG series. Order the 51034368 hydraulic hose today and keep your Jungheinrich DFG truck lifting reliably.