1804401852 Linde Lift Cylinder Assy. 587mm-Ø50 for L-matic

Overview

The 1804401852 lift cylinder assy. 587mm-Ø50 is a replacement hydraulic lift cylinder for Linde electric forklifts and stackers. With a length of 587 mm and a bore diameter of Ø50 mm, this complete cylinder assembly converts hydraulic pressure into the linear force that raises the mast and forks. When a lift cylinder starts to leak, drift under load, or lift unevenly, replacing the full assembly is the most reliable way to restore smooth lifting performance and protect the rest of the hydraulic system.

Compatibility

The 1804401852 for L-matic and AC trucks is specified for the following Linde model families:

• L06AC / L10AC / L12AC / L16AC series – Linde’s compact L-series AC electric trucks in the L06 to L16 capacity range
• L10 – the L10 electric truck from the same L-series line
• L-matic – automated variants of the Linde L-series used in guided warehouse operations
• EX – the explosion-protected EX versions of these trucks for hazardous environments

Before ordering, always match part number 1804401852 against the cylinder currently installed on your truck and verify the 587 mm length and Ø50 mm bore against your existing unit to ensure a correct fit.

Quality and Reliability

This Linde lift cylinder assembly is produced to the manufacturer’s original dimensions and performance specification, so mounting points, stroke and hydraulic connections line up with the factory-fitted component. The honed bore, finished piston rod and durable seal set are engineered for continuous lifting cycles in demanding warehouse and industrial environments. Ordering the correct Linde part number the first time helps minimize downtime, prevent oil contamination and reduce wear on adjacent hydraulic components.

Installation and Maintenance Tips

• Lower the forks fully and depressurize the hydraulic system before starting work.
• Secure the truck and mast according to the vehicle’s service manual.
• Compare the removed cylinder with the new 1804401852 assembly before fitting.
• Keep hydraulic connections clean and protect the rod surface during installation.
• After fitting, bleed the hydraulic circuit, cycle the mast slowly and check for leaks.
• Inspect rods and seals regularly and keep the cylinder clean to extend service life.

Installation by a trained forklift technician is recommended.

Why Order from Us

forkliftpartssearch.com focuses on Linde forklift spare parts, including hard-to-find hydraulic components such as the 1804401852 lift cylinder assy. 587mm-Ø50. Our listings are structured around exact part numbers so you can identify the right component quickly, and our parts specialists are available to answer fitment questions before you order. Whether you maintain a single truck or an entire L-matic, AC or EX fleet, we help you keep your Linde equipment lifting safely and efficiently.