50218953 Pressure Limiting Valve Kit | Jungheinrich

Overview

The 50218953 Kit, pressure limiting valve is a hydraulic replacement kit for Jungheinrich electric counterbalance forklifts. The pressure limiting valve controls the maximum pressure in the hydraulic system, protecting the pump, lift cylinders, and mast from overload. When this valve wears or sticks, operators often notice slow or weak lifting, unusual hydraulic noise, or a mast that does not hold loads correctly. Fitting a new 50218953 kit restores the correct relief setting and helps keep the whole hydraulic circuit working within safe limits.

Compatibility

The 50218953 for CD/CL trucks covers the following Jungheinrich model series:

• CD/CL 16-20 C/H series – compact electric counterbalance trucks in the 1.6 to 2.0 tonne class
• CD/CL 40-50 C/H series – heavy electric counterbalance trucks in the 4.0 to 5.0 tonne class
• CL 16 – 1.6 tonne electric truck

Because variants exist within each series, always match part number 50218953 against the spare parts documentation for your chassis or serial number before ordering. If you are unsure, our team can help you confirm fitment.

Quality and Reliability

This pressure limiting valve kit is supplied as a direct-fit replacement for Jungheinrich part number 50218953. The valve components are made to the dimensions and operating characteristics of the original part, so the kit installs without modification and performs to the specified relief pressure. Consistent valve operation is essential on electric forklifts, where hydraulic overload can quickly damage the pump and lift components; replacing a worn pressure limiting valve promptly is a low-cost way to protect more expensive parts of the truck.

Installation and Maintenance Tips

• Fully lower the forks, relieve system pressure, and disconnect the battery before opening any hydraulic circuit on these electric trucks.
• Follow the Jungheinrich workshop manual for the CD/CL or CL series when removing and refitting the valve.
• Replace all seals and O-rings supplied in the kit; reusing old sealing elements is a common cause of leaks.
• After installation, check and, if required, adjust the relief pressure to the value given in the service documentation, then test lifting with a typical load.
• Inspect the hydraulic oil and filter. Contaminated oil is a frequent cause of pressure valve failure, so addressing the source helps prevent repeat repairs.
• Where local regulations require it, have the kit fitted by a qualified forklift technician.

Why Order from Us

forkliftpartssearch.com specializes in spare parts for Jungheinrich and other leading forklift brands. When you order the 50218953 Kit, pressure limiting valve from us, you get accurate part identification based on your model and serial number, clear product information, and support from a team that works with forklift parts every day. Browse our range of Jungheinrich hydraulic and drive components and order the parts you need with confidence.