50042814 Hydraulic Hose for Jungheinrich EFG Forklifts
Overview
The 50042814 Hose, Hydraulic is a replacement hydraulic hose for select Jungheinrich EFG electric counterbalance forklifts. Hydraulic hoses carry pressurized oil between the pump, control valve and lift cylinders, so a cracked cover, damaged fitting or internal failure quickly shows up as slow lifting, jerky mast movement or fluid on the floor. Fitting a new 50042814 for EFG trucks restores a sealed hydraulic circuit and dependable lifting performance.
Because this hose is referenced under the original Jungheinrich part number 50042814, it is intended as a direct-fit replacement matched to the hose length, end fittings and routing points of the affected trucks. No alternative replacement OEM numbers were supplied for this listing, so use 50042814 as the primary reference when searching, quoting or ordering.
Compatibility
The 50042814 Hose, Hydraulic is listed as fitting the following Jungheinrich electric forklift series:
- EFG 110-115 series
- EFG 110k-115 series
- EFG 213-220 series
- EFG 316-320 series
Before ordering, confirm the part against the number printed on your existing hose or your truck’s identification plate. If you are unsure whether 50042814 covers your exact model variant, send us the model and serial number and our team will check the fitment for you.
Quality and Reliability
Hydraulic lines operate under continuous pressure and are true safety-relevant wear parts. That is why every 50042814 hose supplied by forkliftpartssearch.com is sourced as a direct replacement referenced to the Jungheinrich part number for these EFG models, so the connections, length and routing match the original installation. Pairing a fresh hose with clean hydraulic oil and correctly torqued fittings helps prevent premature failure and keeps your EFG truck productive.
Installation and Maintenance Tips
- Park on level ground, lower the forks fully, switch off the truck, disconnect the battery and relieve system pressure before opening the hydraulic circuit.
- Position a drip tray under the work area and wear gloves and eye protection when handling hydraulic oil.
- Note or photograph the original hose routing, then swap in the new hose without twisting or kinking it, and tighten the fittings to specification using two wrenches.
- Top up the reservoir, cycle the lift slowly and inspect all connections for leaks before returning the truck to service.
- Check hoses regularly for abrasion, bulges, cracked covers or weeping fittings, and replace at the first sign of damage.
Why Order from Us
forkliftpartssearch.com specializes in forklift spare parts, from fast-moving wear items like hydraulic hoses to hard-to-find components for older Jungheinrich trucks. You get accurate part-number search, clear product information and a support team that understands forklift hydraulics. Order the 50042814 Hose, Hydraulic today and keep your Jungheinrich EFG forklift lifting safely and reliably.