Jungheinrich 50035253 Lift Cylinder for EJE Series Trucks

Overview

The 50035253 Cylinder, Lift is a replacement lift cylinder built to match the original Jungheinrich specification for its electric walkie trucks. The lift cylinder is the heart of the hydraulic lifting system: it converts hydraulic pressure into the vertical force that raises the forks and the load. When this component wears out, operators notice slow or uneven lifting, forks that drift down under load, or hydraulic oil leaking around the cylinder body. Fitting a correct replacement restores smooth, full-height lifting and helps protect the rest of the hydraulic circuit from unnecessary strain.

Compatibility

The 50035253 for EJE trucks fits the following Jungheinrich model families:

• EJE 60 – both the MMC and USA build variants
• EJE/-R 20-25 – the EJE and EJE-R trucks in the 2.0 and 2.5 tonne capacity classes

Because Jungheinrich updated part numbers across production runs, always check your truck’s data plate or serial number before ordering. If you are unsure whether the 50035253 Cylinder, Lift matches your truck, send us your chassis or serial number and our parts team will confirm fitment before your order ships.

Quality and Reliability

Lift cylinders work under constant high pressure and heavy dynamic loads, so dimensional accuracy matters. This replacement cylinder is manufactured to the original dimensions, stroke, and mounting points defined by Jungheinrich for the EJE series, so it connects to the existing hydraulic lines and lift linkage without modification. Consistent machining tolerances are important for smooth piston travel and dependable sealing – essential for trucks that complete hundreds of lift cycles per shift in busy warehouse operations.

Installation and Maintenance Tips

Before you replace the lift cylinder on an EJE truck, follow these basic guidelines:

• Depressurize the hydraulic system and lower the forks fully before starting work.
• Disconnect the battery and follow your site’s lockout/tagout procedure on these electric trucks.
• Securely support the lift linkage so no load rests on the hydraulic circuit.
• Catch escaping oil in drip trays and dispose of it according to local regulations.
• While the cylinder is out, inspect hoses, fittings, and seals, and replace any worn components at the same time.
• After fitting, check for leaks and verify full lift travel under load before returning the truck to service.

Cylinder replacement involves heavy components and pressurized hydraulics. If your technicians are not trained for this job, use a qualified forklift service engineer.

Why Order from Us

forkliftpartssearch.com specializes in forklift spare parts, including Jungheinrich components such as the 50035253 Cylinder, Lift. When you order from us you benefit from:

• Fitment support – send us your model and serial number and we confirm the correct part.
• Material handling focus – lift cylinders, seals, filters, and drive parts for electric trucks, all in one catalog.
• Experienced service – our team works with forklift parts every day and can answer technical questions, not just process orders.

Keep your Jungheinrich EJE and EJE/-R trucks lifting reliably – order the 50035253 Cylinder, Lift today.