D180332 PUMP AS for Doosan D10/15/18S & D35/40/45S-2 Series

Overview

The Doosan D180332 PUMP AS is a complete pump assembly manufactured for a range of Doosan diesel forklifts, including the D10/15/18S(D600988), D35/40/45S-2 and D40/45/50SC-2 model families. Because it is supplied as a full assembly, the D180332 arrives ready to install, which saves teardown time and removes the uncertainty of rebuilding a worn pump. If your forklift has lost performance or shows signs of pump wear, fitting the correct D180332 pump assembly is the most reliable way to return the truck to its original operating specification.

Compatibility

This pump assembly serves several Doosan forklift series, which can be grouped as follows:

• D10/15/18S series (D600988) – compact diesel counterbalance trucks
• D35/40/45S-2 series – mid-capacity diesel forklifts
• D40/45/50SC-2 series – cushion tire models in the -2 generation

Reference numbers (A231526) and (SB1077)(F.C.U) are also associated with these applications, so you may encounter those codes in older parts books or service documentation. If you are searching for the D180332 for D10/15/18S(D600988) or for the D35/40/45S-2 and D40/45/50SC-2 series, this is the catalog-correct part. As always, confirm the number against your truck’s serial number and parts manual before ordering.

Quality and Reliability

The D180332 PUMP AS is produced to the dimensions, materials and performance tolerances defined by Doosan for these model families. That means mounting interfaces, drive connections and ports line up as intended, and the assembly delivers the pressure and flow characteristics the truck was designed around. Choosing a correctly engineered pump assembly rather than an improvised substitute helps protect related components in the system and supports consistent performance across demanding warehouse and yard duty cycles.

Installation and Maintenance Tips

• Relieve system pressure and disconnect the truck’s power source before beginning work.
• Follow the service manual for your specific model when removing the old pump assembly.
• Inspect drive couplings, seals, hoses and fittings during the swap, and replace anything visibly worn.
• Torque all fasteners to the values specified by Doosan and refill with the recommended fluid.
• After installation, run the truck at low load, check for leaks and unusual noise, and keep future service intervals on schedule.

Why Order from Us

Forkliftpartssearch.com specializes in Doosan forklift parts, and the D180332 pump assembly is part of our catalog covering the D10/15/18S, D35/40/45S-2 and D40/45/50SC-2 families. Our team helps confirm fitment before you order, so you receive the exact assembly your truck requires. Browse the listing, verify your model, and order the D180332 PUMP AS with confidence.